Budget Attachments
Please browse our range of budget attachments from the list below;
- Front end loader
- 4 in 1 loader
- Grass finishing mower
- Flail mower
- Paddock topper
- Harrow
- Paddock sweeper (Coming Soon)
- Rollers (Coming Soon)
- Rotovator
- Tipping trailer
- Link box
- Post hole borer
- Backhoe
- Menage leveller (Coming Soon)
- Snow plough/blower (Coming Soon)
- Grit/fertiliser spreader (Coming Soon)
- Bale spike (Coming Soon)
- Wood Chipper
Order today: 01403 783616
- Please select image to enlarge
- Model: TM 140
- Cutting width: 1360mm
- HP required: 25
Tidying all kinds of fields, paddocks & meadows, keeping grass, thistles, nettles, docks etc under control. Useful where you have had horses or cattle.
- Select image to enlarge
- Model: FMLD 150
- Cutting width: 1490mm
- HP required: 20-25
Cuts lawns, drives, fairways, where a good finish is required. Various widths up to 6′ (1.8 metres).
- Select Image to enlarge
- Model: EF 135
- Cutting width: 1329mm
- HP required: 20-35
Cuts very rough grass and scrub which has been neglected for some time. May also be used as a Topper and can be used to obtain fine finish
- Please select image to enlarge
- Model: IGN 125
- Cutting width: 1250mm
- HP required: 25-30
Prepares soil, grassland or any area into fine tilth ready for planting.
- Please select image to enlarge
- Model: 85
- Cutting width: 2000mm
- HP required: 25
Exceptional quality harrows. Heavy duty chain links more than capable of pulling out years of dead thatch, destroying molehills, and levelling divots after grazing. Good quality A frame so the tractor can lift it when transporting.
- Please select image to enlarge
- Model: TM 140
- Dimensions: Length 2 metres, width 1.25 metres
- HP required: 1 or 2 tonnes
General transport & carrying duties, hydraulic tipping, removable side panels & tail offering flat trailer facility.
- Please select image to enlarge
- Model: LDJM 252K
- HP required: 25
4 in 1 bucket with jaws that open and allow you to ‘bite’ into material. The bucket can be used for picking up loose stone soil or slurry, and for grading drives and paths
- Please select image to enlarge
- Model: TB130
- Dimensions: 926 x 1300 mm
- HP required: 20+
Probably the most useful thing you will ever put onto the back of a tractor. Carry anything anywhere. Take off the rear flap and use it to scoop up materials.
- Please select image to enlarge
- Model: LDJM 254
- Bucket: 0.22 cubic metres
- Capacity: 440 Kgs
- HP required: 20-30
Load trailers, move soil, stone, bales & aggregates. (Picture shows standard bucket)
- Select image to enlarge
- Model: LW 6
- Maximum digging depth: 1.85 metres
- Maximum digging radius: 2.8 metres
- Maximum lift height: 2.5 metres
- Maximum unloading height: 1.4 metres
- Optional bucket sizes: 230 & 305 mm
Digs trenches - just think mini JCB !
- Please select image to enlarge
- Model: HPHD
- Hole diameter: 152mm
- HP required: 20-30
Dig the correct size hole for gate posts and large fence posts. Auger available in 3 sizes.
Wood chipper
- Model: WC 6
- Throat size: 150 x 150mm
- HP required: 25
Chips prunings from hedges & trees, and will also chip small logs.